That's strange, makes me wonder where the rusty stain is coming from.A quick update. I couldn’t resist taking another look at the ‘bungs’. I peeled one of the bungs back and it seems that the circle of rust is just that - a circle around the outside of the bung. Underneath looks like new as the bung seems to have protected it - so it‘s not rusting from inside the hole outwards as I first thought (well on mine anyway). It still needs better protecting though in my opinion along with some other areas Underneath the car.
I've found your bladder gets weaker as you get older. The plastic seats are a blessing!That's strange, makes me wonder where the rusty stain is coming from.![]()
I'm going to guess it's rusting there because water is trapped between the bung and the metalIt‘s actually worse than I thought. Now I’ve been able to take a proper look. A new car shouldn’t show rust like this should it?
Yeh - might have been better to just leave them out!I'm going to guess it's rusting there because water is trapped between the bung and the metal
I brushed underseal onto all the masked-up areas that I could see and reach in the first week of ownership (not much fun in November!)Yours look sealed whereas mine are not
Whilst washing my 16month old ZS EV on Friday I noticed a mark on the front middle of the roof. On closer investigation I saw it was a rust spot. Looks like from under the paint. Took it down to the dealer and I am waiting on response from MGI have seen one or two You Tube Vids of ZS owners with rust coming up on the under side of the cars.
Some less than a year old!
Also seen a few posts on Facebook about the problem.
Is your car rusty ??
I have seen one or two You Tube Vids of ZS owners with rust coming up on the under side of the cars.
Some less than a year old!
Also seen a few posts on Facebook about the problem.
Is your car rusty ??
Your very welcome !.
I am unable to gain access to the under body of my car due to a total knee replacement, so it will have to go untreated I am afraid.
If had the chance, I would remove the four bungs and inject some wax oil or something similar.
Then I would reinstall the bungs, seal around them and include the surrounding area.
Yep. That's what I thoughtThat doesn’t look good - it looks like corrosion from within the panel. Thanks for sharing.