Replacing license plate bulb

PositiveTom · Apr 24, 2024

Hi guys,

Just put my 69-plate MG ZS EV through its MOT and it passed with one advisory - the license plate bulb.

I looked at the manual and got a new matching bulb, but it seems clear as mud on how to actually replace it.

Are there any useful guides or videos anywhere on how to do this? I've had a quick look on YouTube but nothing seemed to jump out at me.

Thanks in advance!

fred12345 · Apr 24, 2024

PositiveTom said:
Hi guys,

Just put my 69-plate MG ZS EV through it's MOT and it passed with one advisory - the license plate bulb.

I looked at the manual and got a new matching bulb, but it seems clear as mud on how to actually replace it.

Are there any useful guides or videos anywhere on how to do this? I've had a quick look on YouTube but nothing seemed to jump out at me.

Thanks in advance!

should be in the instruction manual online, I remember seeing it ... page 274; check whether it's the same for your model, should be

https://www.mg.co.uk/sites/default/files/2021-11/New%20MG%20ZS%20EV%20Owner%20Manual.pdf

p.s. record YouTube video as you do it and post here as payback ?

PositiveTom · Apr 24, 2024

Like I said, I did look in the manual, but it wasn't very clear or useful. Something about removing the bumper.

fred12345 · Apr 24, 2024

this might help? seems to be a bit more complex than necessary for lightbulbs that need changing fairly often ...

MG ZS EV Rear Bumper Removal

Hi all. I am wanting to remove the rear bumper so as to install a tow bar on my MG ZS EV 2023 facelift edition. I have removed the rear lamp clusters and all the screws from underneath. I have pulled the plastic rear quarter panel off down from the boot lid to the wheel arch but there is...

www.mgevs.com

Runnerarne · May 3, 2024

You can reach the lampholder by lay down on the ground, take your arm under the rear bumper, and feel your way to the lampholder. Then squize the leap at one side off the lampholder and push it down.

smithgt · Dec 5, 2024

Runnerarne said:
You can reach the lampholder by lay down on the ground, take your arm under the rear bumper, and feel your way to the lampholder. Then squize the leap at one side off the lampholder and push it down.

Thanks for the info - very useful.

Tinnycan · Wednesday at 2:47 PM

Just lie on ground and insert screwdriver into one side of holder and pry down. It will drop and pull out of holder as other side is held in.
Done the 2 in 2 minutes.

Tinnycan · Wednesday at 2:47 PM

Push in here

hmadsen · Wednesday at 3:03 PM

Blimey, if there were ever a bulb that should be replaced with a LED it must be this one.

Would be ideal if someone made a whole replacement with watertight housing to swap it out.

Failing that, i would probably replace with a LED, make sure it made good connection with the socket and just glue the whole assembly shut to prevent water ingress

Replacing license plate bulb

PositiveTom

Standard Member

fred12345

Prominent Member

PositiveTom

Standard Member

fred12345

Prominent Member

MG ZS EV Rear Bumper Removal

Runnerarne

Standard Member

Attachments

smithgt

Standard Member

Tinnycan

Standard Member

Tinnycan

Standard Member

hmadsen

Prominent Member

Similar threads

Latest MG EVs video