TPMS Fault Consult Handbook

N

Nanu

Novice Member
Joined
Dec 17, 2024
Messages
2
Reaction score
0
Points
1
Location
Admit Israel
Hi
The car ia a MG EHS PHEV.
I am receiving the warnings shown on the attached images.

.Pay attention to imagine "TPMS-02". No pressure or temperature are shown for any of the four wheels

Please help.
TIA
Nanu
 

Attachments

  • TPMS-01.jpeg
    TPMS-01.jpeg
    218.7 KB · Views: 35
  • TPMS-02.jpeg
    TPMS-02.jpeg
    188.9 KB · Views: 36
  • TPMS-03.jpeg
    TPMS-03.jpeg
    154.7 KB · Views: 33
Depending how old the car is the battery in the sender may have run out or there is a fault on the system. The quick way to find out is go to a tyre place and as if they would check it for you with there reader. Have checked your tyre pressures.
 
Jto said:
Depending how old the car is the battery in the sender may have run out or there is a fault on the system. The quick way to find out is go to a tyre place and as if they would check it for you with there reader. Have checked your tyre pressures.
Click to expand...
Car age is 1.5 year. The pressures are OK. Front 2.5 Bar rear 1.2 Bar.
 
Nanu said:
Front 2.5 Bar rear 1.2 Bar.
Click to expand...
Check out your pressure in the handbook on on line at My MG or on the door as those don’t sound like the correct pressures. After that if the readings don’t come up try a tyre place.
 
Last edited by a moderator:
To have all sensors display nothing says to me there is something upsetting the transmissions to the car or the car itself.

I had similar on a different car which also took out the remote central locking. Is your fob working (i.e does pressing unlock ON THE FOB work?). They transmit on the same frequency as the tpms.
 
Last edited by a moderator:
Here in Malta dealer sticks rigidly to the manual.....and so do I:

PHEVWheels Unladen Condition Cold
Front Wheel 250 kpa/ 2.5 bar/ 37 psi
Rear Wheel 250 kpa/ 2.5 bar/ 37 psi

'Sender' thankfully has not stopped working yet. But at least I am aware of the possibility.
 
Last edited by a moderator:
Is there a way of resetting the TPMS fault consult handbook error without going to a dealer?
I've pumped all the tyres to the correct pressure and drove for a week.
I've done a factory reset and restart of the infotainment system.

Looks like the sender unit has stopped working as I get "--" on all 4 wheels on the dash.
It could just need a reset or it might be a loose connection.
 
a1970man said:
Is there a way of resetting the TPMS fault consult handbook error without going to a dealer?
I've pumped all the tyres to the correct pressure and drove for a week.
I've done a factory reset and restart of the infotainment system.

Looks like the sender unit has stopped working as I get "--" on all 4 wheels on the dash.
It could just need a reset or it might be a loose connection.
Click to expand...
It resets automatically when you drive the car for say 10 minutes.
 
I had this fault on my Petrol ZS Trophy. All 4 tyres were pumped up and even checked at a garage.

I took it to my dealer and the TMPS Module needed to be replaced (Didn't have one in stock so had to take it back). Took a couple of attempts to get it done as the sensors in the valves didn't get picked up my the module.
 

Similar threads

E
Motor Fault Consult Handbook P1B65 DTC code
Replies
9
Views
440
Coulomb
Coulomb
J
Intelligent Speed Assist Fault : consult handbook
Replies
3
Views
2K
schooljules
S
M
Motor Fault - consult handbook
2 3 4
Replies
68
Views
27K
mykg
M
Support us by becoming a Premium Member

Latest MG EVs video

MG ZS EV Retrospective & First Look at the MGS5 EV | Live Q&A with Owners & MGEVs Panel
Published
Subscribe to our YouTube channel
Back
Top Bottom