I did think they may not go into the gap as it's more of a seam than two seperate parts. Thanks for that it's made my mind up now. Would have looked good if doable. ?
My daughter has similar in her Fiat 500 and it works ok although hers in not wireless. In my opinion too smaller screen to be of any real assistance. I think hers was about 40 quid and acted as a dash cam also.
To connect to the reversing live feed is easy . If you look in the section MG4...
When i changed my alloys over the old values from the previous valves were still stored by the vehicle. It took a 5 mile drive before it realised and updated the new values/ pressures.
My tyre compressor went faulty inflating the last tyre i changed over so i was aware that tyre would be down by...
Do you think the strips would fit along the door line to continue on from the dash?
I was thinking of doing this and installing along this line taking the door panels off and wiring through the grommet.
Are the cables to each strip long enough though if i did the rear doors as well?
Apparently so . I read about it on here so took it as read not from experience. As a precaution i marked all wheels up and coded the like for like wheel with no issues. As i understand it some manufacturers self learn but these dont.
This is the cheaper bit of kit which will read the valve and...
You will need something like the Autel valves which will have to be programmed. Its not so straight forward with MG especially the MG4 as it wasnt listed anywhere to do an ECU read via OBD.
I ended up just copying each valve value by scanning and transfering the value to the new valve.
You...
Does it always power on with the multi colour effect or can you have it come on solid colour. Not keen on the strobing thats all. Other than that looks good. Any reason you didnt go for the USB version?
I had this for the first time last night. The missus was driving at relatively load speed and i was sat in the back as my daughter was passenger. Turns out it was a handbag on the back seat which weight wise was next to nothing . Moved it out of the way and the warning stopped.
insurance charged 24 quid for the new wheels as a modification although they will only be on until October depending on weather then the stock ones will go back. I may take the tyres of the stock wheels and stick some winter rubber on.
All finished now. I had the tpms Autel Ts508 delivered today and used to clone the original sensors. The tyres have to be deflated to 10 psi before scanning. If anyone decides to do the same scan the tyre above the valve not the valve as the alloy wheel interferes. Anyway after inflating 3 tyres...
Well wheels all on with locking wheel nuts. I couldn't believe how tight the original bolts were. I could have blown on the wheel wrench so I would advise if you haven't checked yours please do.
Copper Grease on all the bolts took longer than fitting the wheels.wheel alignment pin essential...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.