Deleted member 9909
- Joined
- Sep 18, 2022
- Messages
- 1,209
- Reaction score
- 1,743
- Points
- 488
Reset steering and windows after 12v disconnect. Never having had to do it, it would be good to get confirmation from forum members that this is correct before adding it to hints and tips. Thumbs up would do. Comments more than welcome.
One recommendation is to get the wheels in the straight ahead (centre) position ahead of the disconnection
After the car powers up, you'll likely need to reset the steering wheel (1) and reset all the windows (2).
(1) turn the wheel fully to the left, then fully to the right, then return to the centre
(2) fully lower the driver's window, fully raise the driver's window (may need to be done in increments). Repeat for the other 3 windows.
You may also need to reset any preferences you'd made (e.g. for the CUSTOM drive mode, HVAC settings, etc.)
One recommendation is to get the wheels in the straight ahead (centre) position ahead of the disconnection
After the car powers up, you'll likely need to reset the steering wheel (1) and reset all the windows (2).
(1) turn the wheel fully to the left, then fully to the right, then return to the centre
(2) fully lower the driver's window, fully raise the driver's window (may need to be done in increments). Repeat for the other 3 windows.
You may also need to reset any preferences you'd made (e.g. for the CUSTOM drive mode, HVAC settings, etc.)
Last edited: