BOB353
Standard Member
- Joined
- Nov 13, 2024
- Messages
- 41
- Reaction score
- 24
- Points
- 12
- Location
- Baldivis Western Australia
- Driving
- ZS EV SE LR
I have a 2023 MG ZS EV and I have been trying to upgrade to 2022 maps but for the life of me, I am not able to create a fingerprint.
I have tried 3 USB's with 16GB using FAT32, exFAT and NTFS without any joy.
This is the home screen and if I drag this screen to the left I get the screen below
I select Settings and then scroll down to System
I then select Map Update
Followed by the Instruction Screen
Pressing OK opens the screen that says the USB does not contain any updates which is correct.
Inserting one of the USB's, I get a pop up saying the USB has been inserted.
When I first insert the USB, it flashes a LED to indicate that it is being accessed so the Infotainment unit has seen the stick.
Each time I insert another different format USB, I have rebooted the head unit and each USB has flashed the LED as it was accessed.
When I go back to my W11 PC, I get the following results
FAT32 show LOSTDIR and System Volume Information folder, both are empty
ExFAT only has the System Volume Information folder.
NTFS is completely empty
One attempt yesterday did manage to create these folder but they were all empty - K:\Android\data\com.telenav.app.arp\files
I have installed Naviextra Toolbox on my W11 PC but because I don't have the head unit files on the USB stick, it will not go past the Welcome screen.
What am I doing wrong?. I have been using Naviextra aboyt 10 years ago when I updated the maps in my D-Max fitted with a Clarion head unit but it had the maps on a SD card which I plugged into my PC, no problems but the MGTouch is about to get a fist through the main screen.
Appreciate any feedback.
Bob
I have tried 3 USB's with 16GB using FAT32, exFAT and NTFS without any joy.
This is the home screen and if I drag this screen to the left I get the screen below
I select Settings and then scroll down to System
I then select Map Update
Followed by the Instruction Screen
Pressing OK opens the screen that says the USB does not contain any updates which is correct.
Inserting one of the USB's, I get a pop up saying the USB has been inserted.
When I first insert the USB, it flashes a LED to indicate that it is being accessed so the Infotainment unit has seen the stick.
Each time I insert another different format USB, I have rebooted the head unit and each USB has flashed the LED as it was accessed.
When I go back to my W11 PC, I get the following results
FAT32 show LOSTDIR and System Volume Information folder, both are empty
ExFAT only has the System Volume Information folder.
NTFS is completely empty
One attempt yesterday did manage to create these folder but they were all empty - K:\Android\data\com.telenav.app.arp\files
I have installed Naviextra Toolbox on my W11 PC but because I don't have the head unit files on the USB stick, it will not go past the Welcome screen.
What am I doing wrong?. I have been using Naviextra aboyt 10 years ago when I updated the maps in my D-Max fitted with a Clarion head unit but it had the maps on a SD card which I plugged into my PC, no problems but the MGTouch is about to get a fist through the main screen.
Appreciate any feedback.
Bob