Recent content by Deepbluexl

Why don't you check the wiring first? The FICM might not have a problem.. problems won't go away when you only try to update things when wiring or the Camera is maybe the issue?! Or just Visit the Dealer...he should help..

So possibly the connection to the camera is just not correct or the connection cable is defect. Was it changed after an accident? Could be also possible during change that connection is not fixed or cable was cut. If you get a warning of FVCM Module for LKA you may need to start a recalibration...

The front Camera is not the FVCM Module. The FVCM Module is the Camera for Lane Assist (in Rear Mirror assembly) and won't be visible to the user. You seem to have issues with the Data stream or Analog Video (not sure based on quality it seems to be analog) from the Camera(s) to the...

Could It be that you activated ACC by accident?

Sorry but I can't help you.. this does not make sense and your dealer should fix this mess.. like why should he leave it on R46 but change the MCU for Infotainment to a R63/R67 version? What do You mean with code? When it is about the Code in Sips.. the older Sips Version which is located here...

Are you talking about your car? On mine both work without an issue.. What car are we talking about exactly (MY22/23/24, STD/LUX/Trophy)? Edit: If this is a speciality to your car please make a separate Thread, because with R63/R67 with Sips applied updates the Charge Bar and Android Auto are not...

No this is the VCI... Please have a look for the correct VNCI tool.. To be honest there should be enough hints by now..

Just to be clear.. I'm not talking about the Bosch VCI, it is the VNCI Manager which is shown in this post: https://www.mgevs.com/threads/diagnostic-vdi-vnci-mdi-with-mg4.17679/post-395594 And here the Serial.of the VNCI + Firmware should be displayed. And there you should have the possibility...

With the VNCI manager. This tool should be also linked on the Drive in this thread. This may be your Main issue why it fails .. Edit:

Do you have installed a new Radar, or did an update fail aswell? Maybe you should try to remove 12v from the car, let it sit for 10 min and then reconnect, add a charger and retry with reprogram.

Which Firmware is installed on the VNCI? It should be 1009. Did you connect a charger to the 12V battery? Disable all Power save Options on your Computer, including USB Power save. Somewhere at Device Manager/USB Devices/Disable "Allow to Switch Off USB devices", The Installation of the IPK is...

Did not replace any car but added beside my Ioniq Electric pre-facelift.. still love this EV..

Maybe this is really something like Car VIN (Component)Lock.. so that only new parts can be programmed. But I would guess there are still possibilities in wiping the previous VIN, but not with SIPS.. Makes sense for IPK.. but not for other modules..

I can confirm that the version from the drive still works and I managed to update the missing MCU update for the FICM and my MY23 LUX is now up to date.. We'll see if any other improvement will released in the future..