Enhancements made with 3D printing.

[ttu]

I'm a big fan of 3D printing and enjoy creating and printing stuff.
One issue I've consistently encountered with my MG ZS HYBRID+ is the design of the original cup holders. They're placed too close together, making it impossible to fit two large cups side by side. This became especially bothersome during family trips when my wife had to hold her coffee on her laps.

To tackle this inconvenience, I designed a custom cup holder. This modification directly replaces the original rubber mat and utilizes the existing mounting points, ensuring a seamless fit.

f you've experienced similar frustrations with the stock cup holders and have access to a 3D printer, I encourage you to download and try out my design. I've included all the necessary STL files and instructions for printing and installation on my MakersWorld page:

Cup Holder integrated with Mat - MG ZS HYBRID+ by TomTTU

This project is dedicated to the MG ZS HYBRID+ car, solving the problem of insufficient space for two large cups.The holder is integrated with a mat with raised edges, protecting against spills.The project replaces the original rubber mat, using the same mounting holes.For complete assembly, it...

makerworld.com

I'd love to hear your feedback and see how this solution works for you!

Happy printing!

 

[ttu]

Hi.
Here's another enhancement I've made: a sun visor extension to cover the gap between the mirror and the sun visor.
Link to 3d model:

https://makerworld.com/en/models/1278702-sunvisor-extension-for-mg-zs-hybrid

 

[Noel]

Hi Tom.
I’ve got a Bambu Lab P1S combo, and therefore was interested in your creations, for the ZS Hybrid. As I generally drive for shorts distances, usually on my own, I didn’t think the cup holder would be very useful. But the sun visor probable would be, I’m going to check, and if it looks to be a useful addition I will print one, probably in white.
Many thanks Noel.

 

[ttu]

Hi Noel,

I recommend ABS or ASA - PLA won’t work. I printed mine in black (the only ABS color I currently have). PETG is the minimum required. The sun visor extension is a small, quick print, but it does the job well.