Archev
Prominent Member
- Joined
- Mar 30, 2021
- Messages
- 2,252
- Reaction score
- 3,687
- Points
- 990
- Location
- Borowstouness
- Driving
- Not an MG
I’ve had a few instances of charging my ZS at an untethered Charge point. If I’ve had my folding bike or other stuff in the boot getting the cable out and unzipping it from its bag etc was time consuming- especially if I hadn’t prepared and had left it under the bike under the floor.
So I’ve made an aluminium bracket with a plastic storage box and bolted it under the bonnet to see if a rudimentary “ frunk” made it any easier. It uses existing holes so no drilling was required. It is fairly thin and small so there’s plenty air space all around.
So I can now pop the bonnet, take the “car end” out of the box and plug it in, then the remaining cable and charger plug and attach to the socket.
It’s still just a trial but seems to be easier and less of a faff wandering round the car wrestling the double headed anaconda out of, then back into, the wee bag with the jamming zipper !
So I’ve made an aluminium bracket with a plastic storage box and bolted it under the bonnet to see if a rudimentary “ frunk” made it any easier. It uses existing holes so no drilling was required. It is fairly thin and small so there’s plenty air space all around.
So I can now pop the bonnet, take the “car end” out of the box and plug it in, then the remaining cable and charger plug and attach to the socket.
It’s still just a trial but seems to be easier and less of a faff wandering round the car wrestling the double headed anaconda out of, then back into, the wee bag with the jamming zipper !