Windscreen Wiper Blades

mgpooter

Established Member
Joined
Jun 20, 2024
Messages
83
Reaction score
47
Points
23
Location
S E Hants
Driving
MG3 Hybrid+ SE
We don't need them yet but has anybody found a source for these yet? Have had a search online and nearly all the suppliers don't seem to know our MG3 Hybrids even exist!
 

Yes, that's true, and it's confusing because the system for attaching the windscreen wipers seems unusual or novel.

Fortunately, the new MG ZS Hybrid+ has the same kind of wipers.
 
Never looked at the system on the mg3. I'm assuming which I shouldn't that MG hasn't invented a new fitting type, found this highlighting what Haynes say are the type of connectors.
This is just being offered as a source of data not saying people haven't already checked.
 
HAYNES is not familiar with MG3

Not saying it is as said the article covers different types of fittings doesn't mention specific cars. It shows industry standard fittings and as also said unless mg have produced there own, thought it was worth putting up to see if any compared to what is on car.
 
There's almost certainly an equivalent out there.
I recently changed the original wipers on my MG5 for Bosch Aerotwin A188S.
Perfectly compatible but no mention of them being suitable for any MG let alone the MG5.
The actual applicability list was:

Alfa Romeo Giuletta (940) 04/2010-onwards
Chrysler Delta 06/2011-onwards
Fiat Bravo (198) 03/2007-onwards
Hyundai i30 (FD/FDH) 09/2007-03/2010
Hyundai i30CW (FD/FDH) 02/2008-03/2010
Kia Cee'd (ED/FF2) 11/2006-06/2009
Kia Cee'd Sporty Wagon (ED/FF2) 09/2007-06/2009
Kia Pro Cee'd (ED) 10/2007-06/2009
Lancia Delta (844) 07/2008-onwards
Peugeot 308 (T9) 07/2013-onwards
Peugeot 308 SW (T9) 01/2014-onwards
Skoda Superb (3T4) 03/2008-onwards
Skoda Superb Combi (3T5) 03/2009-onwards
VW Caddy (2C; 2K; SA) 11/2006-onwards
VW Caddy Panel Van (2K) 11/2006-onwards
VW Touran (1T3) 05/2010-05/2015
 
Not saying it is as said the article covers different types of fittings doesn't mention specific cars. It shows industry standard fittings and as also said unless mg have produced there own, thought it was worth putting up to see if any compared to what is on car.
It's true and you're right...

The MG3's fastening system looks like a side lock or pinch tab.

To be confirmed.

Note that the MG3 manual shows a fixing system that is not exact, as it corresponds to the MG4.
 


I think it's more complicated and on this video the K4 adapter looks the closest.

And I'm not even sure of what I'm saying.
 
Last edited:
I needed new wipers for my ZS EV mk1.

Halfords listed them, but the listing was wrong.

I had to get the dealer to replace them, at some cost, inevitably...:(
 
Yes, I understand that's what we want to avoid, of course.

We're waiting for someone to give us the right information about the model that must exist at the major manufacturers (Bosch, Valeo etc).
 
What is the problem with getting the wiper blades from the main dealer? Sure they may be more expensive than your local parts shop or the internet but just think about how much you saved by buying a MG3 in the first place.
 
We don't need them yet but has anybody found a source for these yet? Have had a search online and nearly all the suppliers don't seem to know our MG3 Hybrids even exist!
As I reported in a previous post, I needed to replace the wipers on my MG3 hybrid. Due to the unique fitting, no other store, such as Halfords or European Car Parts, could offer replacements. The wipers I needed came from the dealer where I purchased the vehicle.
 
As I reported in a previous post, I needed to replace the wipers on my MG3 hybrid. Due to the unique fitting, no other store, such as Halfords or European Car Parts, could offer replacements. The wipers I needed came from the dealer where I purchased the vehicle.
Just out of interest @Whoopedoodaa, why did you need to replace yours?
 
Support us by becoming a Premium Member

Latest MG EVs video

MG Hybrid+ EVs OVER-REVVING & more owner feedback
Subscribe to our YouTube channel
Back
Top Bottom