Geekice
Established Member
- Joined
- Oct 10, 2024
- Messages
- 67
- Reaction score
- 71
- Points
- 26
- Location
- Rome, Italy
- Driving
- MG4 Standard
Hi everyone,
A few days ago, I received my VDI to perform some updates via SIPS, if interested see thread:
The first thing I did was update the FICM configuration file and the HVAC unit. Right after that, I took the car for a drive, and I still had my previous settings to keep the cabin warm: 25°C without Eco mode enabled. However, unlike before, the car was getting noticeably hotter, to the point where I had to lower the temperature to 20ºC.
After this update, with an outside temperature between 5°C and 9°C, I found that now the best setting for a comfortable cabin is 20°C with Eco mode enabled. So far, I feel like they’ve done a good job improving the HVAC with this update. I had already been on R38 for a while, so I’m fairly confident that the real improvement came from the SIPS update.
A few days ago, I received my VDI to perform some updates via SIPS, if interested see thread:
Diagnostic VDI, VNCI, MDI with MG4
Diagnostic VDI, VNCI, MDI with MG4
The first thing I did was update the FICM configuration file and the HVAC unit. Right after that, I took the car for a drive, and I still had my previous settings to keep the cabin warm: 25°C without Eco mode enabled. However, unlike before, the car was getting noticeably hotter, to the point where I had to lower the temperature to 20ºC.
After this update, with an outside temperature between 5°C and 9°C, I found that now the best setting for a comfortable cabin is 20°C with Eco mode enabled. So far, I feel like they’ve done a good job improving the HVAC with this update. I had already been on R38 for a while, so I’m fairly confident that the real improvement came from the SIPS update.