thei
Standard Member
yes, it was me... the update took about 10 - 15 minutes
Wasn't this solved when using the default google dns?The only disadvantage is that the hotspot really doesn't work, but I personally have never needed it.
In your smartphone, edit the IP address to manual as in the attachmentI remember it, but how or where do I enter the Google DNS? In my car, router, smartphone?
Mine does 5 mph increments - I prefer thatI also meant to add that I was told by the service person on the phone that 5mph increments on the ACC was “just how it is”, yet magically it now is doing 1mph increments.
I completely forgot to ask about data usage. Dangit.
Mine does 5 mph increments - I prefer that
R59 (there was an R46 but R59 has superseded it). It seems to usually happen in response to a specific issue rather than just to keep you up to date. This thread should have all the info you need.Hi, new MG4 Trophy owner here. Very pleased with my car so far after a week. Only disappointment was finding software seems to b R40. I have read this thread, and I’m getting confused (not hard these days)!
Please can somebody advise what the latest software is. Do I need to ask for other modules to be updated? Will this all be done under warranty by main dealer?
Thanks in advance.
As has been said before if everything works for you don't rush to get the software updated. Your dealer could charge you for updating the software if there's nothing wrong. If R40 works for you then don't rush to get R59 as I believe a newer version is coming out and you'll be visiting the dealer more than once.Hi, new MG4 Trophy owner here. Very pleased with my car so far after a week. Only disappointment was finding software seems to b R40. I have read this thread, and I’m getting confused (not hard these days)!
Please can somebody advise what the latest software is. Do I need to ask for other modules to be updated? Will this all be done under warranty by main dealer?
Thanks in advance.
10-05 11:05:44.482 3330 3330 I abupdate/MessageListener: messageArrived() topic:ota/ep21/0X7A8/getEcuInfoRsp
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: messageArrived() message:{
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "sender": "upclientOtaApp",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "msgName": "getEcuInfoRsp",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "msgInd": "1728090312017",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "msgBody": {
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "ecuInfos": [
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: {
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "ecuPartNum": "EH32_AUS_TBOX_000",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "ecuDid": "0X711",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "ecuSwid": "tbox_mcu",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "supplierCode": "0421291291",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "productDate": "230617"
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: },
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: {
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "ecuPartNum": "EH32_EUUK_AVN_003",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "ecuDid": "0X7A8",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "ecuSwid": "avn_dsp",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "supplierCode": "Visteon",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "productDate": "NA"
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: },
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: {
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "ecuPartNum": "EH32_AUS_TBOX_000",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "ecuDid": "0X711",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "ecuSwid": "tbox_soc",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "supplierCode": "0421291291",
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: "productDate": "230617"
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: }
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: ]
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: }
10-05 11:05:44.483 3330 3330 I abupdate/MessageListener: }
I prefer the 1 mph, as the change also coincides with an ACC that works properly in bends. ?![]()
As far is I know the "R" Version is just your Infotainment - so it doesn't matter to the acc behavior, right?Which version do I need to get ACC that doesn't slow excessively on bends? I am on R40. Is it any later version?
Which version do I need to get ACC that doesn't slow excessively on bends? I am on R40. Is it any later version?
That's possibly because we don't have the reverse camera on the SE in the UK ... I'm not even sure if the EU variants of the SE have one. So maybe the codebase doesn't include for it. ?So for better or worse, I tried it.
So far so good. The install worked and i'm now showing as on R33.
Everything seems to be functioning except for the reverse camera. I get the lines and the radar with the distance, but the camera image stays black. Something to look at.
Other than that, Radio, DAB, Carplay, all the basics, etc all seem to be working fine.
I've now got the non-fullscreen version of Carplay with the MG bar across the top. The pull down menu now has the shortcut to turn off LKA that wasn't there before.
Oh crap, I didn't think of that!That's possibly because we don't have the reverse camera on the SE in the UK ... I'm not even sure if the EU variants of the SE have one. So maybe the codebase doesn't include for it. ?![]()