Project OBD2 - Mobile App v1.2.1 and later

[Mark Holmes]

Too many MG ZS EV owners buying them ?

Recon your right....??

 

[WAC 768]

Can you paste your full set of version data

Hope this helps and the car was registered late Dec 20

 

[Davemac278]

Hi @Mark Holmes this is the one I got from the above link

ELM327 V1.5 OBD2 Bluetooth PIC18f25k80 Chip EOBD Car Auto Diagnostic Scanner | eBay

Find many great new & used options and get the best deals for ELM327 V1.5 OBD2 Bluetooth PIC18f25k80 Chip EOBD Car Auto Diagnostic Scanner at the best online prices at eBay! Free delivery for many products!

www.ebay.co.uk

I got this same reader from ebay as it was recommended on original post. However I cant get it to work.

I've ran the ELM327 Identifer app , connected and scanned but it had ATPPS 1.1 in red so not present on that reader.

I'm wondering if they sent the wrong version in error.

Can you run ELM326 identifier app on your and confirm that it shows in green on yours

Cheers

David

 

[Mark Holmes]

Hope this helps and the car was registered late Dec 20

What OBD2 did you buy for this purpose??

 

[Mark Holmes]

I got this same reader from ebay as it was recommended on original post. However I cant get it to work.

I've ran the ELM327 Identifer app , connected and scanned but it had ATPPS 1.1 in red so not present on that reader.

I'm wondering if they sent the wrong version in error.

Can you run ELM326 identifier app on your and confirm that it shows in green on yours

Cheers

David

This item is out of stock now...

 

[macd2401]

Too many MG ZS EV owners buying them ?

It's like the LED headlight thread all over again ?

 

[JodyS21]

I got this same reader from ebay as it was recommended on original post. However I cant get it to work.

I've ran the ELM327 Identifer app , connected and scanned but it had ATPPS 1.1 in red so not present on that reader.

I'm wondering if they sent the wrong version in error.

Can you run ELM326 identifier app on your and confirm that it shows in green on yours

Cheers

David

That's the one I bought.
It's in the car which wife has taken to work, so can't check anything at the moment.
Mine works though.
I put photos of the box it came in with the boxes ticked on it in an earlier post, check if the one you got was the same.

 

[chromeskull]

anyone got torque working with it? Mine does nothing, its connected to the ECU but pulls no information (just max values due to no data). Thats after connecting with the ZS EV app and clicking special, torque.

I've also noticed that the ZS EV App only pulls 1 value per second. so the general page takes 20+seconds to refresh all values. I have the OBDLink MX+ which is supposed to be fast. Just my like every car I've used it on is slow to read lol.

 

[JodyS21]

Version 1.2.1 works about 40% of the time with my Google Pixel 5.

Car bought early October, came with Comfort 2 installed from the factory. I couldn't charge unlocked or carry out a timed charge.

BMS & HV Fuse update carried out by Chorley Group MG (Burnley) 24th October, just before the really bad 28th version, I have the long equalisation BMS. The IPK was definitely updated as part of this as I remember the mechanic mentioning it, along with the known DCDC, TC, EVCC & OBC.

Charge unlocked - Yes
Timed charge - Yes
Battery heater - No
Graphics - No

View attachment 1915View attachment 1916


Data below, ZS was charged last night to full(cycled to work today so it was still connected when I got home this evening), I had the heated seat on when taking the readings:

View attachment 1918View attachment 1919

I'm just adding your data into the spreadsheet.

Interesting they said they definitely updated the IPK as yours is the same version and so far we've never seen a different version of it. Not sure what the IPK is, maybe it's configuration can be updated without changing the actual version.

OBC is confusing as we've seen it mentioned about updating it a few times, but there's no actual module called OBC, it must be there I think but called something else.

 

[AbuG]

Hope this helps and the car was registered late Dec 20

EU1 is this the withdrawn BMS??
Have you had problems with reduce range, maximum voltage and power?

 

[Gomev]

This is the ODB Bluetooth device I was running that was successful if you want to swap yours out for it with Amazon Amazon product ASIN B00OXXZVTA

Thank you mystreet, great it’s out of stock now....

I have this one being delivered today as recommended by @shikoku14

Wow! just seen it's gone up to £17.12 Must be a lot buying that as well, I paid £12.91 yesterday

 

[Mark Holmes]

I have this one being delivered today as recommended by @shikoku14

Wow! just seen it's gone up to £17.12 Must be a lot buying that as well, I paid £12.91 yesterday

Ordered cheers, fingers ??

 

[AbuG]

anyone got torque working with it? Mine does nothing, its connected to the ECU but pulls no information (just max values due to no data). Thats after connecting with the ZS EV app and clicking special, torque.

I've also noticed that the ZS EV App only pulls 1 value per second. so the general page takes 20+seconds to refresh all values. I have the OBDLink MX+ which is supposed to be fast. Just my like every car I've used it on is slow to read lol.

For torque pro need to enter the PIDs which is very long winded.
However if one person does it, then can share the files and make it easy for everyone else.
I'm also assuming Torque pro is compatible with other devices, like iOS

 

[DanishDude]

Apparently don't buy this one:

OBDII Mini OBD2 Car Diagnostic Scanner Detector Tester Bluetooth White | eBay
It won't even send out a bluetooth signal. It just lights up with a red LED when plugged in. I've been using it on other (petrol) cars without problems.

 

[JodyS21]

Just checked my BMS version of which I've had the Jan 21 update done twice (last update 11/02) and this is 0210622EU1..... Not seen this version in any other posts or the spreadsheet

Before anyone asks I have all the other updates deployed and the full charge is 450v

Well I'm totally bewildered by this.
BMS version 0210622EU1

Was there something weird going on to cause them to do the "Jan 21" update twice?

It's all in the spreadsheet now so you can compare bits to others.

 

[JodyS21]

EU1 is this the withdrawn BMS??
Have you had problems with reduce range, maximum voltage and power?

He's had the jan 21 update applied twice.
Got 450V

Weird, doesn't make sense?

 

[WAC 768]

EU1 is this the withdrawn BMS??
Have you had problems with reduce range, maximum voltage and power?

Range Seems about the same as before the update and after the first BMS update the maximum battery voltage did drop from 455v -> 450v and after 2nd update in mid-Feb, when i collected the car from the dealer it was fully charged and shown 449v, so i assume this is running the latest BMS... The service desk did say MG had done another SW update in Feb but didn't elloborate any further and i didn't ask...

 

[chromeskull]

For torque pro need to enter the PIDs which is very long winded.
However if one person does it, then can share the files and make it easy for everyone else.
I'm also assuming Torque pro is compatible with other devices, like iOS

I'd be happy to do it... unfortunately I dont know how lol.
I don't know where to get the PID's from, it'd be nice to pull them from this app but we will have to wait and see i Guess.

 

[MAS]

I have downloaded the software, but now need to buy the OBD2 can people please post the links to the items they bought that worked?
Thank you

Mark I am at the same stage. Looking forward to get some links

 

[Mark Holmes]

I’m really interested in the SOH (if that’s correct) condition of battery as with over 15000 miles completed have I lost any battery capacity / degradation?