Labougie
Established Member
You ´re probably right
, he was surprised and for him, nothing has changed
Labougie
Édit: typo
, he was surprised and for him, nothing has changed
Labougie
Édit: typo
2,3 is a lie. Ask for full SIPS modules update.My MG4 Trophy LR went in to get a Warranty Service for the undertray yesterday and I asked them to look at some software issues:
1. Bluetooth requesting pairing once every couple of days
2. LKA over zealous.
3. ACC slows excessively on bends.
I was rather nervous as the garage insisted on me pre-authorizing payment for investigations just in case these weren't warranty issues but in the end I wasn't charged for anything and got the following answers:
1. A USB update was applied for the telephony/bluetooth issue
2. "You have it set to most aggressive level that is the problem"
3. "It is supposed to slow on bends"
Today I went to compare the SW versions and found the following (changes in bold) but could do with a little input on interpreting this...
Module Old New VR 4C051 1.0.0_EH32_SOP_2407251341 T-BOX MCU SNMKP21E32 SNMKP21E32 T-BOX Modem 1.02.001.r02 1.02.001.r02 T-BOX MPU SNAKP21E32 SNAKP21E32 T-BOX BT BTM010SACwa21019 BTM010SACwa21019 DSP 1400000000 1400000000 FCIM MCU 68.4.3.0 68.4.7.0 FCIM MPU SWI68-29958-1300R59 SWI68-29958-1300R63 FCIM App Integration 4C051 1.0.0_EH32_SOP_2407251341 FCIM WLAN firmware 0x8a11 0x8a11 FCIM Bluetooth firmware 20191129181225a 20191129181225a Map Navigation 6.2.60.1.46507-P
So I can see they have upgraded the infotainment from R59 to R63. Have they done anything else?
If yes, will it help with the BT issue? [I think the above tells me they didn't update the TBOX so probably not]
I note the VR version string is both changed and a different format what does this mean?
Good morning at all. Can someone help me? Were I can found the folder AVN_MPU?If you are currently on R1300R46 or 1300R59, the ota_update.zip archive must be in a folder named AVN_MPU.
There was quite some discussion why the displayed temperature was wrong. We never got to a point that we had proper analysis. But this MG move looks like a cosmetic solution to get the complaints off the table....* I believe that R38 rescales the indicated temperature range for the HVAC, so where previously I'd set 25°C as my target I now set 22°C.
There’s also 3D sound included in R38 (as well as with R59)
Its includ in r38No, deffo no 3D sound in R33, but I'm pretty sure it's included in R38
Question is: does it have an effect?Its includ in r38
it's a little better...Question is: does it have an effect?
No but R59 is very similar.Is there a location from which we can download the R63 update?
Drop down from the left or the right , it doesn't work from the centre of the screen where there is the climate control info.I have 1100R38 now but I don't seems to have a drop down menu at all even if I have not connected my mobile. Is this right?